<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="7.3.0">
<drawing>
<board>
<plain>
<text>+</text>
<text>Power</text>
<text>A</text>
<text>B</text>
<text>MicroView</text>
<text>MicroJoy</text>
<text>JOYSTICK</text>
<wire x1="6.35" y1="0" x2="77.47" y2="0" width="0.2032" layer="20"/>
<wire x1="77.47" y1="0" x2="83.82" y2="6.35" width="0.2032" layer="20" curve="90"/>
<wire x1="83.82" y1="6.35" x2="83.82" y2="26.67" width="0.2032" layer="20"/>
<wire x1="83.82" y1="26.67" x2="77.47" y2="33.02" width="0.2032" layer="20" curve="90"/>
<wire x1="77.47" y1="33.02" x2="6.35" y2="33.02" width="0.2032" layer="20"/>
<wire x1="6.35" y1="33.02" x2="0" y2="26.67" width="0.2032" layer="20" curve="90"/>
<wire x1="0" y1="26.67" x2="0" y2="6.35" width="0.2032" layer="20"/>
<wire x1="0" y1="6.35" x2="6.35" y2="0" width="0.2032" layer="20" curve="90"/>
<text>ON</text>
<text>OFF</text>
<text>+</text>
<text>-</text>
<text>GND</text>
<text>VCC</text>
<text>SDA</text>
<text>SCL</text>
<text>D6</text>
<text>D5</text>
<text>TXD</text>
<text>RXD</text>
<text>V1.3</text>
<text>Designed by
Andrew Meyer</text>
<text>BATT</text>
<text>BATT</text>
<text>+</text>
<text>-</text>
<text>GND</text>
<text>CTS</text>
<text>VCC</text>
<text>DTR</text>
<text>BLK</text>
<text>GRN</text>
<text>FTDI</text>
<text>I2C</text>
<text>FOAM
PAD</text>
<text>FOAM
PAD</text>
<text>LIPO CHARGER</text>
<text>USB</text>
<text>3.7V 400mAh
LIPO BATTERY</text>
<text>X</text>
<text>Y</text>
<text>BUZ</text>
<text>A</text>
<text>B</text>
</plain>
<libraries>
<library name="SparkFun-Electromechanical">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="BUZZER-12MM">
<description>&lt;b&gt;BUZZER&lt;/b&gt;</description>
</package>
<package name="SWITCH-SPDT">
</package>
</packages>
</library>
<library name="SparkFun-Aesthetics">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="OSHW-LOGO-S">
</package>
<package name="SFE_LOGO_NAME_FLAME_.1">
</package>
<package name="CREATIVE_COMMONS">
</package>
</packages>
</library>
<library name="SparkFun-Passives">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="AXIAL-0.3">
</package>
</packages>
</library>
<library name="SparkFun-Connectors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="1X02">
</package>
<package name="1X04_NO_SILK_ALL_ROUND">
</package>
<package name="1X01">
</package>
<package name="1X06">
</package>
</packages>
</library>
<library name="MicroJoy">
<packages>
<package name="MICROVIEW_SOCKET_16">
<description>Package using two Mill-Max 8-pin through-board sockets (P/N 834-43-008-10-001000)</description>
</package>
<package name="PSP1000_JOYSTICK_2MM_HEADER">
<description>Package for mounting with a 4-pin 2mm-pitch right-angle header (3M P/N 951104-7622-AR)</description>
</package>
<package name="BATTERY_OFFSET">
<description>Offset battery pads, 0.1" spacing</description>
</package>
<package name="OMRON_B3F4/50XX">
<description>Package for Omron B3F-4050, B3F-4055, B3F-5050, B3F-5051</description>
</package>
</packages>
</library>
<library name="SparkFun-Capacitors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="CAP-PTH-SMALL2">
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="BTN_B" library="MicroJoy" package="OMRON_B3F4/50XX" value="OMRON_TACT_SWITCH12MM">
<attribute name="PROD_ID" value="SWCH-09185"/>
</element>
<element name="BTN_A" library="MicroJoy" package="OMRON_B3F4/50XX" value="OMRON_TACT_SWITCH12MM">
<attribute name="PROD_ID" value="SWCH-09185"/>
</element>
<element name="MICROVIEW" library="MicroJoy" package="MICROVIEW_SOCKET_16" value="MICROVIEW_SOCKET16"/>
<element name="BUZZER" library="SparkFun-Electromechanical" package="BUZZER-12MM" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="POWER" library="SparkFun-Electromechanical" package="SWITCH-SPDT" value="">
<attribute name="PROD_ID" value="SWCH-08261"/>
<attribute name="VALUE"/>
</element>
<element name="RB" library="SparkFun-Passives" package="AXIAL-0.3" value="10K">
<attribute name="VALUE"/>
</element>
<element name="RA" library="SparkFun-Passives" package="AXIAL-0.3" value="10K">
<attribute name="VALUE"/>
</element>
<element name="JOYSTICK" library="MicroJoy" package="PSP1000_JOYSTICK_2MM_HEADER" value="PSP1000_JOYSTICK2MM_HEADER"/>
<element name="I2C" library="SparkFun-Connectors" package="1X04_NO_SILK_ALL_ROUND" value="">
<attribute name="VALUE"/>
</element>
<element name="D5_D6" library="SparkFun-Connectors" package="1X02" value="">
<attribute name="VALUE"/>
</element>
<element name="A3" library="SparkFun-Connectors" package="1X01" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="U$1" library="SparkFun-Aesthetics" package="SFE_LOGO_NAME_FLAME_.1" value=""/>
<element name="FRAME1" library="SparkFun-Aesthetics" package="CREATIVE_COMMONS" value="FRAME-LETTER"/>
<element name="LOGO1" library="SparkFun-Aesthetics" package="OSHW-LOGO-S" value="OSHW-LOGOS"/>
<element name="C1" library="SparkFun-Capacitors" package="CAP-PTH-SMALL2" value="0.1uF">
<attribute name="VALUE"/>
</element>
<element name="BATT" library="MicroJoy" package="BATTERY_OFFSET" value="BATTERYOFFSET"/>
<element name="FTDI_HEADER" library="SparkFun-Connectors" package="1X06" value="">
<attribute name="PROD_ID" value="CONN-08437"/>
</element>
</elements>
<signals>
<signal name="N$1">
<contactref element="JOYSTICK" pad="VCC"/>
<contactref element="I2C" pad="2"/>
<contactref element="MICROVIEW" pad="15"/>
<contactref element="BTN_A" pad="1"/>
<contactref element="BTN_B" pad="1"/>
<contactref element="FTDI_HEADER" pad="4"/>
</signal>
<signal name="N$9">
<contactref element="POWER" pad="1"/>
<contactref element="BATT" pad="VCC"/>
</signal>
<signal name="N$15">
<contactref element="MICROVIEW" pad="16"/>
<contactref element="POWER" pad="2"/>
</signal>
<signal name="N$17">
<contactref element="BTN_B" pad="3"/>
<contactref element="RB" pad="P$1"/>
<contactref element="MICROVIEW" pad="12"/>
</signal>
<signal name="N$18">
<contactref element="BTN_A" pad="3"/>
<contactref element="RA" pad="P$1"/>
<contactref element="MICROVIEW" pad="11"/>
</signal>
<signal name="GND">
<contactref element="RA" pad="P$2"/>
<contactref element="POWER" pad="3"/>
<contactref element="RB" pad="P$2"/>
<contactref element="BUZZER" pad="+"/>
<contactref element="MICROVIEW" pad="8"/>
<contactref element="JOYSTICK" pad="GND"/>
<contactref element="I2C" pad="1"/>
<contactref element="BATT" pad="GND"/>
<contactref element="FTDI_HEADER" pad="6"/>
<contactref element="FTDI_HEADER" pad="5"/>
</signal>
<signal name="N$2">
<contactref element="MICROVIEW" pad="10"/>
<contactref element="FTDI_HEADER" pad="2"/>
</signal>
<signal name="N$3">
<contactref element="MICROVIEW" pad="9"/>
<contactref element="FTDI_HEADER" pad="3"/>
</signal>
<signal name="N$6">
<contactref element="I2C" pad="4"/>
<contactref element="MICROVIEW" pad="2"/>
</signal>
<signal name="N$7">
<contactref element="I2C" pad="3"/>
<contactref element="MICROVIEW" pad="3"/>
</signal>
<signal name="N$11">
<contactref element="D5_D6" pad="2"/>
<contactref element="MICROVIEW" pad="13"/>
</signal>
<signal name="N$12">
<contactref element="D5_D6" pad="1"/>
<contactref element="MICROVIEW" pad="14"/>
</signal>
<signal name="N$13">
<contactref element="MICROVIEW" pad="4"/>
<contactref element="A3" pad="1"/>
</signal>
<signal name="N$4">
<contactref element="MICROVIEW" pad="7"/>
<contactref element="BUZZER" pad="-"/>
</signal>
<signal name="N$5">
<contactref element="JOYSTICK" pad="X"/>
<contactref element="MICROVIEW" pad="6"/>
</signal>
<signal name="N$8">
<contactref element="JOYSTICK" pad="Y"/>
<contactref element="MICROVIEW" pad="5"/>
</signal>
<signal name="N$14">
<contactref element="C1" pad="1"/>
<contactref element="FTDI_HEADER" pad="1"/>
</signal>
<signal name="N$10">
<contactref element="C1" pad="2"/>
<contactref element="MICROVIEW" pad="1"/>
</signal>
</signals>
</board>
</drawing>
</eagle>
