Altium

Design Rule Verification Report

Date: 4/20/2025
Time: 12:04:38 AM
Elapsed Time: 00:00:00
Filename: C:\Users\Public\Documents\Altium\P24398_Smoke_Sensor\P24398_Smoke_Sensor.PcbDoc
Warnings: 0
Rule Violations: 0
Waived Violations: 3

Summary

Warnings Count
Total 0

Rule Violations Count
Clearance Constraint (Gap=5mil) (All),(All) 0
Clearance Constraint (Gap=10mil) (InPolygon),(All) 0
Short-Circuit Constraint (Allowed=No) (All),(All) 0
Un-Routed Net Constraint ( (All) ) 0
Modified Polygon (Allow modified: No), (Allow shelved: No) 0
Width Constraint (Min=6mil) (Max=400mil) (Preferred=8mil) (All) 0
Width Constraint (Min=20mil) (Max=40mil) (Preferred=30mil) (InNetClass('Power')) 0
Width Constraint (Min=10mil) (Max=30mil) (Preferred=20mil) (InNet('GND')) 0
Width Constraint (Min=10mil) (Max=30mil) (Preferred=20mil) (InNetClass('3V3')) 0
Routing Topology Rule(Topology=Shortest) (All) 0
Power Plane Connect Rule(Relief Connect )(Expansion=4mil) (Conductor Width=6mil) (Air Gap=6mil) (Entries=4) (All) 0
Minimum Annular Ring (Minimum=4mil) (All) 0
Hole Size Constraint (Min=10mil) (Max=265mil) (All) 0
Hole To Hole Clearance (Gap=10mil) (All),(All) 0
Minimum Solder Mask Sliver (Gap=0mil) (All),(All) 0
Silk To Solder Mask (Clearance=5mil) (IsPad),(All) 0
Silk to Silk (Clearance=0mil) (All),(All) 0
Net Antennae (Tolerance=0mil) (All) 0
Board Clearance Constraint (Gap=0mil) (All) 0
Height Constraint (Min=0mil) (Max=1000mil) (Prefered=500mil) (All) 0
Total 0

Waived Violations Count
Board Clearance Constraint (Gap=0mil) (All) 3
Total 3

Rule Violations

Waived Violations

Board Clearance Constraint (Gap=0mil) (All)
Board Outline Clearance(Outline Edge): (Collision < 15mil) Between Board Edge And Track (2192.598mil,1561.339mil)(2244.567mil,1561.339mil) on Top Overlay
Waived by Andrew Wolters at 4/19/2025 11:50:32 PM
USB is meant to hang off board. Waiving violation, as pads are cleanly on board.
-- AJW
Board Outline Clearance(Outline Edge): (Collision < 15mil) Between Board Edge And Track (2192.598mil,1878.268mil)(2244.567mil,1878.268mil) on Top Overlay
Waived by Andrew Wolters at 4/19/2025 11:50:32 PM
USB is meant to hang off board. Waiving violation, as pads are cleanly on board.
-- AJW
Board Outline Clearance(Outline Edge): (Collision < 15mil) Between Board Edge And Track (2244.567mil,1561.339mil)(2244.567mil,1878.268mil) on Top Overlay
Waived by Andrew Wolters at 4/19/2025 11:50:32 PM
USB is meant to hang off board. Waiving violation, as pads are cleanly on board.
-- AJW
Back to top