<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="7.4.0">
<drawing>
<board>
<plain>
<wire x1="0.635" y1="0" x2="23.495" y2="0" width="0" layer="20"/>
<hole x="1.905" y="1.905" drill="3.2"/>
<wire x1="24.13" y1="0.635" x2="24.13" y2="24.13" width="0" layer="20"/>
<wire x1="23.495" y1="24.765" x2="0.635" y2="24.765" width="0" layer="20"/>
<wire x1="0" y1="24.13" x2="0" y2="0.635" width="0" layer="20"/>
<wire x1="0" y1="24.13" x2="0.635" y2="24.765" width="0" layer="20" curve="-90"/>
<wire x1="23.495" y1="24.765" x2="24.13" y2="24.13" width="0" layer="20" curve="-90"/>
<wire x1="0" y1="0.635" x2="0.635" y2="0" width="0" layer="20" curve="90"/>
<wire x1="23.495" y1="0" x2="24.13" y2="0.635" width="0" layer="20" curve="90"/>
<text>RESET</text>
<hole x="22.225" y="1.905" drill="3.2"/>
<text>A85M</text>
<text>A85M</text>
<text>RST</text>
<text>ADC</text>
<text>EN</text>
<text>16</text>
<text>14</text>
<text>12</text>
<text>13</text>
<text>3V3</text>
<text>GND</text>
<text>TXD</text>
<text>RXD</text>
<text>5</text>
<text>4</text>
<text>0</text>
<text>2</text>
<text>15</text>
<text>LED</text>
<text>GND</text>
<text>DTR</text>
<text>TXO</text>
<text>RXI</text>
<text>VCC</text>
<text>CTS</text>
<text>RST</text>
<text>TXD</text>
<text>ADC</text>
<text>EN</text>
<text>16</text>
<text>14</text>
<text>12</text>
<text>13</text>
<text>3V3</text>
<text>GND</text>
<text>15</text>
<text>2</text>
<text>0</text>
<text>4</text>
<text>5</text>
<text>RXD</text>
<wire x1="0" y1="0.635" x2="0.635" y2="0" width="0" layer="46" curve="90"/>
<wire x1="0.635" y1="0" x2="23.495" y2="0" width="0" layer="46"/>
<wire x1="23.495" y1="0" x2="24.13" y2="0.635" width="0" layer="46" curve="90"/>
<wire x1="24.13" y1="0.635" x2="24.13" y2="24.13" width="0" layer="46"/>
<wire x1="24.13" y1="24.13" x2="23.495" y2="24.765" width="0" layer="46" curve="90"/>
<wire x1="23.495" y1="24.765" x2="0.635" y2="24.765" width="0" layer="46"/>
<wire x1="0.635" y1="24.765" x2="0" y2="24.13" width="0" layer="46" curve="90"/>
<wire x1="0" y1="24.13" x2="0" y2="0.635" width="0" layer="46"/>
<text>R1</text>
<text>12K</text>
<text>12K</text>
<text>R2</text>
<text>R3</text>
<text>330</text>
<text>C1</text>
<text>C2</text>
<text>D3</text>
<text>D1</text>
<text>SW1</text>
<text>U2</text>
<text>0U1</text>
<text>0U1</text>
<text>U1</text>
<text>PSF-A85</text>
<text>D2</text>
<text>BLU</text>
<text>AP2112</text>
</plain>
<libraries>
<library name="ITEAD">
<packages>
<package name="PSF-A85">
</package>
</packages>
</library>
<library name="SparkFun-Connectors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="1X08_ROUND">
</package>
<package name="FTDI_DEVICE_SIDE">
<description>Package for devices meant to mate to an FTDI connector.</description>
</package>
<package name="LUXEON-PAD">
</package>
</packages>
</library>
<library name="Seeed-OPL-Diode">
<packages>
<package name="SOD-323">
<description>&lt;b&gt;0805&lt;b&gt;&lt;p&gt;</description>
</package>
</packages>
</library>
<library name="SparkFun-PowerIC">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find drivers, regulators, and amplifiers.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SOT23-5">
<description>&lt;b&gt;Small Outline Transistor&lt;/b&gt;</description>
</package>
</packages>
</library>
<library name="Capacitor-2016">
<packages>
<package name="C0603">
<description>&lt;b&gt;0603&lt;b&gt;&lt;p&gt;</description>
</package>
</packages>
</library>
<library name="Resistor-2016">
<packages>
<package name="R0603">
</package>
</packages>
</library>
<library name="LED-2016">
<packages>
<package name="LED-0603">
</package>
</packages>
</library>
<library name="lamloei_logo_3">
<packages>
<package name="LAMLEOI_LOGO_3">
</package>
</packages>
</library>
<library name="Switch-2016">
<packages>
<package name="SW2-2.6-3.0X2.5X1.2+0.4MM">
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="U1" library="ITEAD" package="PSF-A85" value="PSF-A85"/>
<element name="J1" library="SparkFun-Connectors" package="1X08_ROUND" value="">
<attribute name="PROD_ID" value="CONN-08437"/>
<attribute name="VALUE"/>
</element>
<element name="J2" library="SparkFun-Connectors" package="1X08_ROUND" value="">
<attribute name="PROD_ID" value="CONN-08437"/>
<attribute name="VALUE"/>
</element>
<element name="J4" library="SparkFun-Connectors" package="FTDI_DEVICE_SIDE" value="FTDI_DEVICE"/>
<element name="D1" library="Seeed-OPL-Diode" package="SOD-323" value="30V-0.5A">
<attribute name="MPN" value="LRB551V-30T1G"/>
<attribute name="NAME"/>
</element>
<element name="D2" library="Seeed-OPL-Diode" package="SOD-323" value="30V-0.5A">
<attribute name="MPN" value="LRB551V-30T1G"/>
<attribute name="NAME"/>
</element>
<element name="U2" library="SparkFun-PowerIC" package="SOT23-5" value="3.3V">
<attribute name="PROD_ID" value="VREG-12457"/>
</element>
<element name="C1" library="Capacitor-2016" package="C0603" value="100nf">
<attribute name="MPN" value="CC0603KRX7R9BB104"/>
<attribute name="NAME"/>
</element>
<element name="C2" library="Capacitor-2016" package="C0603" value="100nf">
<attribute name="MPN" value="CC0603KRX7R9BB104"/>
<attribute name="NAME"/>
</element>
<element name="R2" library="Resistor-2016" package="R0603" value="12K">
<attribute name="MPN" value="RC0603FR-0712KL"/>
</element>
<element name="R1" library="Resistor-2016" package="R0603" value="12K">
<attribute name="MPN" value="RC0603FR-0712KL"/>
</element>
<element name="R3" library="Resistor-2016" package="R0603" value="330R">
<attribute name="MPN" value="RC0603FR-07330RL"/>
</element>
<element name="D3" library="LED-2016" package="LED-0603" value="BLUE-0603">
<attribute name="MPN" value="19-217-BHC-ZL1M2RY-3T"/>
</element>
<element name="U$1" library="lamloei_logo_3" package="LAMLEOI_LOGO_3" value="LAMLEOI_LOGO_3"/>
<element name="SW1" library="Switch-2016" package="SW2-2.6-3.0X2.5X1.2+0.4MM" value="B3U-1000P-2P-SMD">
<attribute name="MPN" value="B3U-1000P-2P-SMD"/>
</element>
<element name="U$2" library="lamloei_logo_3" package="LAMLEOI_LOGO_3" value="LAMLEOI_LOGO_3"/>
<element name="J3" library="SparkFun-Connectors" package="LUXEON-PAD" value="">
<attribute name="VALUE"/>
</element>
</elements>
<signals>
<signal name="RST">
<contactref element="J1" pad="1"/>
<contactref element="U1" pad="P$24"/>
<contactref element="C1" pad="1"/>
<contactref element="SW1" pad="1"/>
</signal>
<signal name="ADC">
<contactref element="J1" pad="2"/>
<contactref element="U1" pad="P$2"/>
</signal>
<signal name="EN">
<contactref element="U1" pad="P$3"/>
<contactref element="J1" pad="3"/>
<contactref element="R1" pad="1"/>
</signal>
<signal name="IO16">
<contactref element="J1" pad="4"/>
<contactref element="U1" pad="P$4"/>
</signal>
<signal name="IO14">
<contactref element="J1" pad="5"/>
<contactref element="U1" pad="P$5"/>
</signal>
<signal name="IO12">
<contactref element="J1" pad="6"/>
<contactref element="U1" pad="P$6"/>
</signal>
<signal name="IO13">
<contactref element="J1" pad="7"/>
<contactref element="U1" pad="P$7"/>
</signal>
<signal name="3.3V">
<contactref element="J1" pad="8"/>
<contactref element="U1" pad="P$23"/>
<contactref element="U2" pad="5"/>
<contactref element="R1" pad="2"/>
<contactref element="C2" pad="2"/>
<contactref element="R3" pad="2"/>
</signal>
<signal name="TXD">
<contactref element="U1" pad="P$22"/>
<contactref element="J2" pad="1"/>
<contactref element="J4" pad="P$2"/>
</signal>
<signal name="RXD">
<contactref element="U1" pad="P$21"/>
<contactref element="J2" pad="2"/>
<contactref element="D2" pad="+"/>
</signal>
<signal name="IO5">
<contactref element="J2" pad="3"/>
<contactref element="U1" pad="P$19"/>
</signal>
<signal name="IO4">
<contactref element="J2" pad="4"/>
<contactref element="U1" pad="P$11"/>
</signal>
<signal name="IO0">
<contactref element="U1" pad="P$10"/>
<contactref element="J2" pad="5"/>
<contactref element="D1" pad="+"/>
</signal>
<signal name="IO2">
<contactref element="U1" pad="P$9"/>
<contactref element="J2" pad="6"/>
<contactref element="D3" pad="-"/>
</signal>
<signal name="IO15">
<contactref element="U1" pad="P$8"/>
<contactref element="J2" pad="7"/>
<contactref element="R2" pad="1"/>
</signal>
<signal name="GND">
<contactref element="U1" pad="P$20"/>
<contactref element="U1" pad="P$12"/>
<contactref element="J2" pad="8"/>
<contactref element="U2" pad="2"/>
<contactref element="J4" pad="P$6"/>
<contactref element="R2" pad="2"/>
<contactref element="C2" pad="1"/>
<contactref element="SW1" pad="2"/>
</signal>
<signal name="5V">
<contactref element="U2" pad="3"/>
<contactref element="U2" pad="1"/>
<contactref element="J4" pad="P$4"/>
</signal>
<signal name="N$1">
<contactref element="J4" pad="P$3"/>
<contactref element="D1" pad="-"/>
<contactref element="D2" pad="-"/>
</signal>
<signal name="N$5">
<contactref element="C1" pad="2"/>
<contactref element="J4" pad="P$1"/>
</signal>
<signal name="N$3">
<contactref element="R3" pad="1"/>
<contactref element="D3" pad="+"/>
</signal>
<signal name="ANT">
<contactref element="U1" pad="P$1"/>
<contactref element="J3" pad="P$1"/>
</signal>
</signals>
</board>
</drawing>
</eagle>
