18V Charger
V1.1 11.2013
Xenocoder
<b>Diodes</b>
<ul>
<li>Zener 1N47xx (as in protection for the MOSFET in the AMZ MOSFET Booster)
<li>rectifier 1N4001-1N4008 (for polarity reversal protection in power supply sections)
<li>clipping 1N914 (as in a TS808)
<li>LED (light emitting diode, 3mm and 5mm)
<li>mostly gathered from Eagle libraries
</ul>
<b>DO-41 0.3" pad spacing</b>
>NAME
>VALUE
<b>Capacitors, Polar Electrolytic, Radial </b>
<ul>
<li>large value capacitors: .22 - 470uF (uF = µF = mF)
<li>often used in power supply filters
</ul>
<b>8mm diameter, 3.5mm lead spacing, 0.1" pad spacing</b>
>NAME
>VALUE
<b>5mm diameter, 2mm lead spacing, 0.1" pad spacing</b>
>NAME
>VALUE
<b>Integrated Circuits</b>
<ul>
<li>mostly op amps (e.g., 4558, TL072)</li>
<li>also CD4049 (for Anderton's Tube Sound Fuzz, the Red Llama, ...)
<li>generally gathered from Eagle libraries
</ul>
<b>Dual In Line Package</b>
>NAME
>VALUE
<b>Supply</b>
<ul>
<li>input, output, ground, and power supply.
<li>these are used on a schematic for placeholders and on a board for pads for off-board components like jacks.
</ul>
<b>Square Pad</b>
<ul><li>drill diameter 1 mm</li></ul>
>NAME
<b>EAGLE Design Rules</b>
<p>
Die Standard-Design-Rules sind so gewählt, dass sie für
die meisten Anwendungen passen. Sollte ihre Platine
besondere Anforderungen haben, treffen Sie die erforderlichen
Einstellungen hier und speichern die Design Rules unter
einem neuen Namen ab.
<b>Laen's PCB Order Design Rules</b>
<p>
Please make sure your boards conform to these design rules.
Since Version 6.2.2 text objects can contain more than one line,
which will not be processed correctly with this version.