<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="6.6.0">
<drawing>
<board>
<plain>
<wire x1="0.254" y1="0.254" x2="65.258" y2="0.254" width="0" layer="20"/>
<wire x1="65.258" y1="0.254" x2="65.258" y2="32.182" width="0" layer="20"/>
<wire x1="65.258" y1="32.182" x2="0.254" y2="32.182" width="0" layer="20"/>
<wire x1="0.254" y1="32.182" x2="0.254" y2="0.254" width="0" layer="20"/>
<text>nm3210</text>
<text>G</text>
<text>B</text>
<text>R</text>
<text>V</text>
<text>IN</text>
<text>MODE</text>
<text>RESET</text>
<text>2015</text>
<text>RGB LED Controller</text>
</plain>
<libraries>
<library name="SparkFun-DigitalIC">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find all manner of digital ICs- microcontrollers, memory chips, logic chips, FPGAs, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="DIL28-3">
<description>Standard 28-pin DIP package.&lt;br&gt;
IC needs to have legs bent before insertion.</description>
</package>
</packages>
</library>
<library name="RBBB">
<description>Generated from &lt;b&gt;ByteseekerMini.sch&lt;/b&gt;&lt;p&gt;
by exp-project-lbr.ulp</description>
<packages>
<package name="ELECTROLYTIC_CAP">
<description>&lt;b&gt;ELECTROLYTIC CAPACITOR&lt;/b&gt;&lt;p&gt;
grid 2.54 mm, diameter 6 mm</description>
</package>
<package name="POWER_JACK">
</package>
</packages>
</library>
<library name="SparkFun-Capacitors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="CAP-PTH-SMALL">
</package>
</packages>
</library>
<library name="SparkFun-DiscreteSemi">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find discrete semiconductors- transistors, diodes, TRIACs, optoisolators, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="DIODE-1N4001">
</package>
</packages>
</library>
<library name="SparkFun-FreqCtrl">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find crystals and oscillators and other things that go "tick".&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="HC49US">
<description>&lt;B&gt;CRYSTAL&lt;/B&gt;</description>
</package>
</packages>
</library>
<library name="SparkFun-Connectors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SCREWTERMINAL-5MM-2">
</package>
<package name="1X02_2.54_SCREWTERM">
</package>
<package name="1X05_LONGPADS">
</package>
</packages>
</library>
<library name="SparkFun-Electromechanical">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SWITCH-SPDT">
</package>
<package name="TACTILE-PTH">
<description>&lt;b&gt;OMRON SWITCH&lt;/b&gt;</description>
</package>
</packages>
</library>
<library name="adafruit">
<packages>
<package name="TO92-EBC-OVAL">
<description>&lt;b&gt;TO-92&lt;/b&gt;&lt;p&gt;
grid 5.08 mm</description>
</package>
<package name="0207/9">
</package>
</packages>
</library>
<library name="SparkFun-PowerIC_01">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find drivers, regulators, and amplifiers.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="78XXL">
<description>&lt;b&gt;VOLTAGE REGULATOR&lt;/b&gt;</description>
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="U1" library="SparkFun-DigitalIC" package="DIL28-3" value="ATMEGA328P">
<attribute name="VALUE"/>
</element>
<element name="C1" library="RBBB" package="ELECTROLYTIC_CAP" value="47μ">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C2" library="RBBB" package="ELECTROLYTIC_CAP" value="47μ">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="J1" library="RBBB" package="POWER_JACK" value="Power Jack">
<attribute name="VALUE"/>
</element>
<element name="D1" library="SparkFun-DiscreteSemi" package="DIODE-1N4001" value="4001">
<attribute name="VALUE"/>
</element>
<element name="Y1" library="SparkFun-FreqCtrl" package="HC49US" value="16 MHz">
<attribute name="VALUE"/>
</element>
<element name="C4" library="SparkFun-Capacitors" package="CAP-PTH-SMALL" value="22 pF">
<attribute name="VALUE"/>
</element>
<element name="C5" library="SparkFun-Capacitors" package="CAP-PTH-SMALL" value="22 pF">
<attribute name="VALUE"/>
</element>
<element name="JP1" library="SparkFun-Connectors" package="1X02_2.54_SCREWTERM" value="Red/Ground"/>
<element name="JP2" library="SparkFun-Connectors" package="1X02_2.54_SCREWTERM" value="Green/Blue"/>
<element name="JP3" library="SparkFun-Connectors" package="SCREWTERMINAL-5MM-2" value="Power In">
<attribute name="VALUE"/>
<attribute name="STOREFRONT_ID" value="PRT-08432"/>
</element>
<element name="S1" library="SparkFun-Electromechanical" package="SWITCH-SPDT" value="Power Switch">
<attribute name="PROD_ID" value="SWCH-08261"/>
<attribute name="VALUE"/>
</element>
<element name="JP4" library="SparkFun-Connectors" package="1X05_LONGPADS" value="RTC Input">
<attribute name="VALUE"/>
</element>
<element name="RESET" library="SparkFun-Electromechanical" package="TACTILE-PTH" value="SWITCH-MOMENTARY-2PTH">
<attribute name="PROD_ID" value=" SWCH-08441"/>
<attribute name="NAME"/>
</element>
<element name="MODE" library="SparkFun-Electromechanical" package="TACTILE-PTH" value="SWITCH-MOMENTARY-2PTH">
<attribute name="PROD_ID" value=" SWCH-08441"/>
<attribute name="NAME"/>
</element>
<element name="R1" library="adafruit" package="0207/9" value="10K">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R2" library="adafruit" package="0207/9" value="10K">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C6" library="SparkFun-Capacitors" package="CAP-PTH-SMALL" value="100nF">
<attribute name="VALUE"/>
</element>
<element name="R6" library="adafruit" package="0207/9" value="1K">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R7" library="adafruit" package="0207/9" value="1K">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R8" library="adafruit" package="0207/9" value="1K">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="Q4" library="adafruit" package="TO92-EBC-OVAL" value="2N2907">
<attribute name="VALUE"/>
</element>
<element name="Q5" library="adafruit" package="TO92-EBC-OVAL" value="2N2907"/>
<element name="Q6" library="adafruit" package="TO92-EBC-OVAL" value="2N2907"/>
<element name="U2" library="SparkFun-PowerIC_01" package="78XXL" value="L7805">
<attribute name="VALUE"/>
</element>
<element name="C3" library="SparkFun-Capacitors" package="CAP-PTH-SMALL" value="100nF">
<attribute name="VALUE"/>
</element>
</elements>
<signals>
<signal name="VIN_POSTSWITCH">
<contactref element="C2" pad="+"/>
<contactref element="D1" pad="C"/>
<contactref element="S1" pad="1"/>
<contactref element="U2" pad="IN"/>
</signal>
<signal name="GND-ISO">
<contactref element="C2" pad="-"/>
<contactref element="D1" pad="A"/>
<contactref element="J1" pad="GND"/>
<contactref element="J1" pad="GNDBREAK"/>
<contactref element="JP3" pad="1"/>
<contactref element="C1" pad="-"/>
<contactref element="U2" pad="GND"/>
<contactref element="U1" pad="8"/>
<contactref element="U1" pad="22"/>
<contactref element="C4" pad="1"/>
<contactref element="C5" pad="1"/>
<contactref element="C6" pad="2"/>
<contactref element="JP1" pad="P2"/>
<contactref element="JP4" pad="1"/>
<contactref element="MODE" pad="1"/>
<contactref element="C3" pad="1"/>
<contactref element="RESET" pad="1"/>
</signal>
<signal name="VCC">
<contactref element="C1" pad="+"/>
<contactref element="U2" pad="OUT"/>
<contactref element="R2" pad="2"/>
<contactref element="JP4" pad="2"/>
<contactref element="Q4" pad="E"/>
<contactref element="Q5" pad="E"/>
<contactref element="Q6" pad="E"/>
<contactref element="U1" pad="20"/>
<contactref element="U1" pad="7"/>
<contactref element="R1" pad="2"/>
</signal>
<signal name="N$1">
<contactref element="U1" pad="9"/>
<contactref element="Y1" pad="2"/>
<contactref element="C5" pad="2"/>
</signal>
<signal name="N$3">
<contactref element="U1" pad="10"/>
<contactref element="Y1" pad="1"/>
<contactref element="C4" pad="2"/>
</signal>
<signal name="VIN_PRESWITCH">
<contactref element="J1" pad="PWR"/>
<contactref element="S1" pad="2"/>
<contactref element="JP3" pad="2"/>
<contactref element="S1" pad="3"/>
</signal>
<signal name="RESET_LINE">
<contactref element="U1" pad="1"/>
<contactref element="RESET" pad="3"/>
<contactref element="C3" pad="2"/>
<contactref element="R1" pad="1"/>
</signal>
<signal name="SWITCH_LINE">
<contactref element="C6" pad="1"/>
<contactref element="U1" pad="12"/>
<contactref element="R2" pad="1"/>
<contactref element="MODE" pad="3"/>
</signal>
<signal name="RED">
<contactref element="R6" pad="1"/>
<contactref element="Q4" pad="B"/>
</signal>
<signal name="GREEN">
<contactref element="R7" pad="1"/>
<contactref element="Q5" pad="B"/>
</signal>
<signal name="BLUE">
<contactref element="R8" pad="1"/>
<contactref element="Q6" pad="B"/>
</signal>
<signal name="GREEN_OUT">
<contactref element="JP2" pad="P1"/>
<contactref element="Q5" pad="C"/>
</signal>
<signal name="BLUE_OUT">
<contactref element="JP2" pad="P2"/>
<contactref element="Q6" pad="C"/>
</signal>
<signal name="PC4">
<contactref element="U1" pad="27"/>
<contactref element="JP4" pad="3"/>
</signal>
<signal name="PC5">
<contactref element="U1" pad="28"/>
<contactref element="JP4" pad="4"/>
</signal>
<signal name="RED_LINE">
<contactref element="U1" pad="15"/>
<contactref element="R6" pad="2"/>
</signal>
<signal name="GREEN_LINE">
<contactref element="U1" pad="16"/>
<contactref element="R7" pad="2"/>
</signal>
<signal name="BLUE_LINE">
<contactref element="U1" pad="17"/>
<contactref element="R8" pad="2"/>
</signal>
<signal name="RED_OUT">
<contactref element="JP1" pad="P1"/>
<contactref element="Q4" pad="C"/>
</signal>
<signal name="N$5">
</signal>
<signal name="N$2">
</signal>
</signals>
</board>
</drawing>
</eagle>
