<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="6.6.0">
<drawing>
<board>
<plain>
<hole x="2.54" y="2.54" drill="3.2"/>
<hole x="2.54" y="22.86" drill="3.2"/>
<hole x="22.86" y="22.86" drill="3.2"/>
<hole x="22.86" y="2.54" drill="3.2"/>
<text>FAN2</text>
<text>FAN1</text>
<text>D1</text>
<text>S1</text>
<text>U1</text>
<text>Q1</text>
<text>R1</text>
<text>R3</text>
<text>R2</text>
<text>C1</text>
<text>U2</text>
<text>PWR-12V</text>
<text>FANNATOR 1000
fntr_elec_v2</text>
<text>DTR</text>
<text>GND</text>
<text>CTS</text>
<text>VCC</text>
<text>TX</text>
<text>RX</text>
<wire x1="0" y1="2.54" x2="0" y2="22.86" width="0.254" layer="20"/>
<wire x1="0" y1="22.86" x2="2.54" y2="25.4" width="0.254" layer="20" curve="-90"/>
<wire x1="2.54" y1="25.4" x2="22.86" y2="25.4" width="0.254" layer="20"/>
<wire x1="22.86" y1="25.4" x2="25.4" y2="22.86" width="0.254" layer="20" curve="-90"/>
<wire x1="25.4" y1="22.86" x2="25.4" y2="2.54" width="0.254" layer="20"/>
<wire x1="25.4" y1="2.54" x2="22.86" y2="0" width="0.254" layer="20" curve="-90"/>
<wire x1="22.86" y1="0" x2="2.54" y2="0" width="0.254" layer="20"/>
<wire x1="2.54" y1="0" x2="0" y2="2.54" width="0.254" layer="20" curve="-90"/>
<text>.</text>
<text>goo.gl/9rcpWH
20141123</text>
</plain>
<libraries>
<library name="SparkFun-Capacitors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="0805">
</package>
</packages>
</library>
<library name="adafruit">
<packages>
<package name="JST-PH-2-THM-RA">
<description>&lt;b&gt;S2B-PH-K-S&lt;/b&gt; 
&lt;p&gt;
JST PH 2-pin thru-home side entry</description>
</package>
<package name="LED3MM">
<description>&lt;B&gt;LED&lt;/B&gt;&lt;p&gt;
3 mm, round</description>
</package>
</packages>
</library>
<library name="Pete's-Custom">
<packages>
<package name="SOT363">
</package>
<package name="PETE-LOGO2">
</package>
</packages>
</library>
<library name="SparkFun-DigitalIC">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find all manner of digital ICs- microcontrollers, memory chips, logic chips, FPGAs, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SO08-EIAJ">
<description>Fits EIAJ packages (wide version of the SOIC-8).</description>
</package>
</packages>
</library>
<library name="SparkFun-PowerIC">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find drivers, regulators, and amplifiers.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SOT23-5">
<description>&lt;b&gt;Small Outline Transistor&lt;/b&gt;</description>
</package>
</packages>
</library>
<library name="SparkFun-Connectors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="1X06">
</package>
<package name="1X02">
</package>
</packages>
</library>
<library name="SparkFun-Passives">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/ 
&lt;br&gt;&lt;br&gt;
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="0805">
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="C1" library="SparkFun-Capacitors" package="0805" value="0.1uF"/>
<element name="CN1" library="adafruit" package="JST-PH-2-THM-RA" value="PWR"/>
<element name="CN2-FAN1" library="adafruit" package="JST-PH-2-THM-RA" value=""/>
<element name="Q1" library="Pete's-Custom" package="SOT363" value=""/>
<element name="U1" library="SparkFun-DigitalIC" package="SO08-EIAJ" value="Tiny85-20-SMT">
<attribute name="PROD_ID" value="IC-09092"/>
</element>
<element name="U2" library="SparkFun-PowerIC" package="SOT23-5" value="5V">
<attribute name="PROD_ID" value="VREG-00823"/>
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="JP1-FTDI" library="SparkFun-Connectors" package="1X06" value="ISP"/>
<element name="CN3-FAN3" library="adafruit" package="JST-PH-2-THM-RA" value=""/>
<element name="R1" library="SparkFun-Passives" package="0805" value="100"/>
<element name="LED1" library="adafruit" package="LED3MM" value=""/>
<element name="R2" library="SparkFun-Passives" package="0805" value="1k"/>
<element name="R3" library="SparkFun-Passives" package="0805" value="1k"/>
<element name="JP2-BUT" library="SparkFun-Connectors" package="1X02" value="M02PTH"/>
<element name="U$1" library="Pete's-Custom" package="PETE-LOGO2" value="PETE-LOGO2"/>
</elements>
<signals>
<signal name="VIN">
<contactref element="U2" pad="1"/>
<contactref element="CN1" pad="1"/>
<contactref element="U2" pad="3"/>
<contactref element="CN2-FAN1" pad="1"/>
<contactref element="CN3-FAN3" pad="1"/>
</signal>
<signal name="GND">
<contactref element="U2" pad="2"/>
<contactref element="CN1" pad="2"/>
<contactref element="C1" pad="2"/>
<contactref element="U1" pad="4"/>
<contactref element="JP1-FTDI" pad="GND"/>
<contactref element="R2" pad="1"/>
<contactref element="R3" pad="1"/>
<contactref element="R1" pad="1"/>
<contactref element="Q1" pad="1"/>
<contactref element="Q1" pad="4"/>
<contactref element="JP2-BUT" pad="2"/>
</signal>
<signal name="VCC">
<contactref element="U2" pad="5"/>
<contactref element="C1" pad="1"/>
<contactref element="U1" pad="8"/>
<contactref element="JP1-FTDI" pad="VCC"/>
</signal>
<signal name="D0">
<contactref element="U1" pad="5"/>
<contactref element="JP1-FTDI" pad="RXI"/>
<contactref element="LED1" pad="A"/>
</signal>
<signal name="D1">
<contactref element="U1" pad="6"/>
<contactref element="JP1-FTDI" pad="TXO"/>
</signal>
<signal name="D2_A1">
<contactref element="U1" pad="7"/>
<contactref element="JP2-BUT" pad="1"/>
<contactref element="JP1-FTDI" pad="CTS"/>
</signal>
<signal name="D3_A3">
<contactref element="U1" pad="2"/>
<contactref element="Q1" pad="2"/>
<contactref element="R2" pad="2"/>
</signal>
<signal name="D4_A2">
<contactref element="U1" pad="3"/>
<contactref element="Q1" pad="5"/>
<contactref element="R3" pad="2"/>
</signal>
<signal name="RST">
<contactref element="U1" pad="1"/>
<contactref element="JP1-FTDI" pad="DTR"/>
</signal>
<signal name="N$1">
<contactref element="LED1" pad="K"/>
<contactref element="R1" pad="2"/>
</signal>
<signal name="FAN1">
<contactref element="CN2-FAN1" pad="2"/>
<contactref element="Q1" pad="6"/>
</signal>
<signal name="FAN2">
<contactref element="CN3-FAN3" pad="2"/>
<contactref element="Q1" pad="3"/>
</signal>
<signal name="N$2">
</signal>
<signal name="N$3">
</signal>
</signals>
</board>
</drawing>
</eagle>
