Altium

Design Rule Verification Report

Date:		2020/11/28
Time:		22:24:32
Elapsed Time:		00:00:00
Filename:		C:\Users\shino\Documents\Altium\Project\Arduboy\Arduboy3\Arduboy_V3.5-3\Arduboy_V3.5-2.PcbDoc

Warnings:		3
Rule Violations:		2

Summary

Warnings	Count
Unplated multi-layer pad(s) detected	3
Total	3

Rule Violations	Count
Clearance Constraint (Gap=6mil) (All),(All)	0
Short-Circuit Constraint (Allowed=No) (All),(All)	0
Un-Routed Net Constraint ( (All) )	0
Modified Polygon (Allow modified: No), (Allow shelved: No)	0
Width Constraint (Min=6mil) (Max=30mil) (Preferred=6mil) (All)	0
Power Plane Connect Rule(Relief Connect )(Expansion=20mil) (Conductor Width=10mil) (Air Gap=10mil) (Entries=4) (All)	0
Hole Size Constraint (Min=1mil) (Max=100mil) (All)	0
Hole To Hole Clearance (Gap=10mil) (All),(All)	0
Minimum Solder Mask Sliver (Gap=2mil) (All),(All)	2
Silk To Solder Mask (Clearance=0mil) (IsPad),(All)	0
Silk to Silk (Clearance=6mil) (All),(All)	0
Net Antennae (Tolerance=0mil) (All)	0
Height Constraint (Min=0mil) (Max=1000mil) (Prefered=500mil) (All)	0
Total	2

Warnings

Unplated multi-layer pad(s) detected
Pad Free-2(845.56mil,52mil) on Multi-Layer on Net GND
Pad Free-2(246mil,57mil) on Multi-Layer on Net GND
Pad Free-2(1077.745mil,826mil) on Multi-Layer on Net GND

Minimum Solder Mask Sliver (Gap=2mil) (All),(All)
Minimum Solder Mask Sliver Constraint: (0.573mil < 2mil) Between Pad USB1-(477mil,206mil) on Multi-Layer And Pad USB1-A12(458.88mil,267.625mil) on Bottom Layer [Bottom Solder] Mask Sliver [0.573mil]
Minimum Solder Mask Sliver Constraint: (0.573mil < 2mil) Between Pad USB1-(704.56mil,206mil) on Multi-Layer And Pad USB1-A1(722.68mil,267.625mil) on Bottom Layer [Bottom Solder] Mask Sliver [0.573mil]