<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="6.5.0">
<drawing>
<board>
<plain>
<wire x1="0.5334" y1="1.0668" x2="61.902540625" y2="1.089659375" width="0" layer="20"/>
<wire x1="61.902540625" y1="1.089659375" x2="61.8746" y2="42.6874" width="0" layer="20"/>
<wire x1="61.8746" y1="42.6874" x2="0.5334" y2="42.7636" width="0" layer="20"/>
<wire x1="0.5334" y1="42.7636" x2="0.5334" y2="1.0668" width="0" layer="20"/>
<text>VM Mother Board
roger-parkinson.com
(c)2017</text>
<text>VCC(3.3V)</text>
<text>GND</text>
<text>CS</text>
<text>RESET</text>
<text>RS</text>
<text>SDI</text>
<text>SCK</text>
<text>LED</text>
<text>SDO</text>
<text>T_CLK</text>
<text>T_CS</text>
<text>T_DO</text>
<text>T_DO</text>
<text>T_IRQ</text>
<text>TX</text>
<text>RX</text>
<text>POWER</text>
<text>PULSE</text>
<text>LED0</text>
<text>LED1</text>
<text>TONE</text>
<text>WAKE</text>
<text>GND</text>
<text>10UFTA 10uf</text>
<text>A13</text>
<text>33</text>
<text>32</text>
<text>31</text>
<text>30</text>
<text>29</text>
<text>A12</text>
<text>0.1uF</text>
<text>+</text>
</plain>
<libraries>
<library name="SparkFun-Connectors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="MICRO-SD-SOCKET-PP">
</package>
<package name="1X14">
</package>
<package name="1X09_NO_SILK">
</package>
<package name="1X07">
</package>
</packages>
</library>
<library name="SparkFun">
<packages>
<package name="0805">
</package>
</packages>
</library>
<library name="SparkFun-Resistors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="0805">
</package>
</packages>
</library>
<library name="LGA14R8OP1X6">
<description>&lt;b&gt;ST Microelectronics Devices&lt;/b&gt;&lt;p&gt;
Microcontrollers,  I2C components, linear devices&lt;p&gt;
http://www.st.com&lt;p&gt;
&lt;i&gt;Include st-microelectronics-2.lbr, st-microelectronics-3.lbr.&lt;p&gt;&lt;/i&gt;

&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="LGA14R80P1X6">
<description>&lt;b&gt;LGA14R80P1X6&lt;/b&gt;&lt;p&gt;</description>
</package>
</packages>
</library>
<library name="SparkFun-Passives">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="EIA6032">
</package>
</packages>
</library>
<library name="adafruit">
<packages>
<package name="SOT23-5L">
<description>&lt;b&gt;Small Outline Transistor&lt;/b&gt;&lt;p&gt;
package type OT</description>
</package>
<package name="M0805">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
MELF 0.10 W</description>
</package>
<package name="C0805K">
<description>&lt;b&gt;Ceramic Chip Capacitor KEMET 0805 Reflow solder&lt;/b&gt;&lt;p&gt;
Metric Code Size 2012</description>
</package>
<package name="JST-PH-2-THM">
<description>4UCon #01528
http://www.4uconnector.com/online/object/4udrawing/01528.pdf</description>
</package>
<package name="R0805">
<description>&lt;b&gt;RESISTOR&lt;/b&gt;&lt;p&gt;
chip</description>
</package>
</packages>
</library>
<library name="led">
<description>&lt;b&gt;LEDs&lt;/b&gt;&lt;p&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;&lt;br&gt;
Extended by Federico Battaglin &lt;author&gt;&amp;lt;federico.rd@fdpinternational.com&amp;gt;&lt;/author&gt; with DUOLED</description>
<packages>
<package name="CHIPLED_0805">
<description>&lt;b&gt;CHIPLED&lt;/b&gt;&lt;p&gt;
Source: http://www.osram.convergy.de/ ... LG_R971.pdf</description>
</package>
</packages>
</library>
<library name="SparkFun-Capacitors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="EIA3216">
</package>
</packages>
</library>
<library name="SparkFun-Electromechanical">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find anything that moves- switches, relays, buttons, potentiometers. Also, anything that goes on a board but isn't electrical in nature- screws, standoffs, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SWITCH-SPST-SMD-A">
</package>
</packages>
</library>
<library name="Teensy_3_and_LC_Series_Boards_v1.4">
<packages>
<package name="TEENSY_3.0-3.2&amp;LC_ALL_PINS">
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="MICROSD" library="SparkFun-Connectors" package="MICRO-SD-SOCKET-PP" value="USD-SOCKETNEW">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="LSM303" library="LGA14R8OP1X6" package="LGA14R80P1X6" value="LSM303DLHC">
<attribute name="PACKAGE" value="LGA-14"/>
<attribute name="OC_NEWARK" value="73T6648"/>
<attribute name="MPN" value="LSM303DLHC"/>
<attribute name="SUPPLIER" value="STMicroelectronics"/>
<attribute name="OC_FARNELL" value="2068595"/>
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C3" library="SparkFun" package="0805" value="4.7uF">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C4" library="SparkFun" package="0805" value="0.1uF">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R4" library="SparkFun-Resistors" package="0805" value="10k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R6" library="SparkFun-Resistors" package="0805" value="10k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C6" library="SparkFun" package="0805" value="0.22uF">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="10UFTA" library="SparkFun-Passives" package="EIA6032" value="10uf"/>
<element name="LIPO" library="adafruit" package="SOT23-5L" value="MCP73811/2">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="LDO" library="adafruit" package="SOT23-5L" value="LP298XS">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R17" library="adafruit" package="M0805" value="2K">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="LED1" library="led" package="CHIPLED_0805" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R1" library="adafruit" package="M0805" value="470">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C1" library="adafruit" package="C0805K" value="0.1uf">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C2" library="SparkFun-Capacitors" package="EIA3216" value="4.7uF TA">
<attribute name="PROD_ID" value="CAP-00811"/>
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="CN1" library="adafruit" package="JST-PH-2-THM" value="">
<attribute name="NAME"/>
</element>
<element name="C5" library="adafruit" package="C0805K" value="4.7uf">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C7" library="adafruit" package="C0805K" value="2.2uf">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R2" library="adafruit" package="R0805" value="100k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R14" library="adafruit" package="R0805" value="10k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R16" library="adafruit" package="R0805" value="10k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="S3" library="SparkFun-Electromechanical" package="SWITCH-SPST-SMD-A" value="Off/On"/>
<element name="U$1" library="Teensy_3_and_LC_Series_Boards_v1.4" package="TEENSY_3.0-3.2&amp;LC_ALL_PINS" value="TEENSY_3.1-3.2_ALL_PINS">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="TFT" library="SparkFun-Connectors" package="1X14" value="ILI9341 XPT2046">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R7" library="SparkFun-Resistors" package="0805" value="10k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R8" library="SparkFun-Resistors" package="0805" value="330">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R3" library="SparkFun-Resistors" package="0805" value="10k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R9" library="SparkFun-Resistors" package="0805" value="10k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R10" library="SparkFun-Resistors" package="0805" value="10k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="JP2" library="SparkFun-Connectors" package="1X09_NO_SILK" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="JP1" library="SparkFun-Connectors" package="1X07" value="">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
</elements>
<signals>
<signal name="AGND">
<contactref element="U$1" pad="AGND"/>
</signal>
<signal name="VBAT">
<contactref element="U$1" pad="VBAT"/>
</signal>
<signal name="AREF">
<contactref element="U$1" pad="AREF"/>
</signal>
<signal name="GND">
<contactref element="MICROSD" pad="6"/>
<contactref element="MICROSD" pad="GND1"/>
<contactref element="MICROSD" pad="GND3"/>
<contactref element="LSM303" pad="7"/>
<contactref element="C3" pad="2"/>
<contactref element="LSM303" pad="11"/>
<contactref element="LSM303" pad="10"/>
<contactref element="C4" pad="1"/>
<contactref element="10UFTA" pad="P$2"/>
<contactref element="LIPO" pad="2"/>
<contactref element="LDO" pad="2"/>
<contactref element="C1" pad="2"/>
<contactref element="C2" pad="C"/>
<contactref element="R17" pad="2"/>
<contactref element="CN1" pad="2"/>
<contactref element="C5" pad="2"/>
<contactref element="C7" pad="2"/>
<contactref element="R2" pad="2"/>
<contactref element="U$1" pad="GND"/>
<contactref element="U$1" pad="GND1"/>
<contactref element="TFT" pad="2"/>
<contactref element="R8" pad="2"/>
<contactref element="U$1" pad="GND"/>
<contactref element="U$1" pad="GND1"/>
<contactref element="JP2" pad="9"/>
<contactref element="S3" pad="3"/>
</signal>
<signal name="N$2">
<contactref element="LSM303" pad="6"/>
<contactref element="C3" pad="1"/>
</signal>
<signal name="SCL">
<contactref element="LSM303" pad="2"/>
<contactref element="R6" pad="1"/>
<contactref element="U$1" pad="19/A5"/>
</signal>
<signal name="SDA">
<contactref element="LSM303" pad="3"/>
<contactref element="R4" pad="1"/>
<contactref element="U$1" pad="18/A4"/>
</signal>
<signal name="SCK">
<contactref element="MICROSD" pad="5"/>
<contactref element="TFT" pad="7"/>
<contactref element="U$1" pad="13"/>
<contactref element="TFT" pad="10"/>
</signal>
<signal name="TFT_CS">
<contactref element="U$1" pad="10"/>
<contactref element="TFT" pad="3"/>
<contactref element="R10" pad="2"/>
</signal>
<signal name="PULSE">
<contactref element="U$1" pad="17/A3"/>
<contactref element="JP2" pad="4"/>
</signal>
<signal name="N$8">
<contactref element="LSM303" pad="13"/>
<contactref element="C6" pad="1"/>
</signal>
<signal name="N$10">
<contactref element="LSM303" pad="12"/>
<contactref element="C6" pad="2"/>
</signal>
<signal name="5V">
<contactref element="C5" pad="1"/>
<contactref element="R14" pad="1"/>
<contactref element="U$1" pad="VUSB"/>
<contactref element="LIPO" pad="4"/>
<contactref element="LED1" pad="A"/>
</signal>
<signal name="REGEN">
<contactref element="LDO" pad="3"/>
<contactref element="R2" pad="1"/>
<contactref element="R14" pad="2"/>
<contactref element="R16" pad="2"/>
<contactref element="S3" pad="2"/>
</signal>
<signal name="LIPO">
<contactref element="LIPO" pad="3"/>
<contactref element="LDO" pad="1"/>
<contactref element="C2" pad="A"/>
<contactref element="CN1" pad="1"/>
<contactref element="S3" pad="1"/>
</signal>
<signal name="N$17">
<contactref element="LIPO" pad="5"/>
<contactref element="R17" pad="1"/>
</signal>
<signal name="N$1">
<contactref element="LIPO" pad="1"/>
<contactref element="R1" pad="1"/>
</signal>
<signal name="N$3">
<contactref element="LED1" pad="C"/>
<contactref element="R1" pad="2"/>
</signal>
<signal name="N$4">
<contactref element="C1" pad="1"/>
<contactref element="LDO" pad="4"/>
</signal>
<signal name="RX">
<contactref element="U$1" pad="0"/>
<contactref element="JP2" pad="2"/>
</signal>
<signal name="LED0">
<contactref element="U$1" pad="20/A6"/>
<contactref element="JP2" pad="5"/>
</signal>
<signal name="3.3V">
<contactref element="TFT" pad="4"/>
<contactref element="U$1" pad="3.3V1"/>
<contactref element="U$1" pad="3.3V"/>
<contactref element="TFT" pad="1"/>
<contactref element="R3" pad="2"/>
<contactref element="MICROSD" pad="4"/>
<contactref element="R9" pad="2"/>
<contactref element="R4" pad="2"/>
<contactref element="LSM303" pad="14"/>
<contactref element="C4" pad="2"/>
<contactref element="LSM303" pad="1"/>
<contactref element="R6" pad="2"/>
<contactref element="10UFTA" pad="P$1"/>
<contactref element="R10" pad="1"/>
</signal>
<signal name="TFT_RS">
<contactref element="TFT" pad="5"/>
<contactref element="U$1" pad="9"/>
</signal>
<signal name="DIN">
<contactref element="TFT" pad="9"/>
<contactref element="U$1" pad="12"/>
<contactref element="TFT" pad="13"/>
<contactref element="MICROSD" pad="7"/>
</signal>
<signal name="T_CS">
<contactref element="TFT" pad="11"/>
<contactref element="U$1" pad="8"/>
<contactref element="R9" pad="1"/>
</signal>
<signal name="T_IRQ">
<contactref element="TFT" pad="14"/>
<contactref element="U$1" pad="2"/>
</signal>
<signal name="DOUT">
<contactref element="U$1" pad="11"/>
<contactref element="TFT" pad="12"/>
<contactref element="TFT" pad="6"/>
<contactref element="MICROSD" pad="3"/>
</signal>
<signal name="SD_CS">
<contactref element="MICROSD" pad="2"/>
<contactref element="R3" pad="1"/>
<contactref element="U$1" pad="15/A1"/>
</signal>
<signal name="TONE">
<contactref element="U$1" pad="23/A9"/>
<contactref element="JP2" pad="7"/>
</signal>
<signal name="WAKEUP">
<contactref element="U$1" pad="22/A8"/>
<contactref element="JP2" pad="8"/>
</signal>
<signal name="LED1">
<contactref element="U$1" pad="21/A7"/>
<contactref element="JP2" pad="6"/>
</signal>
<signal name="VOLTAGE">
<contactref element="U$1" pad="14/A0"/>
<contactref element="R7" pad="1"/>
<contactref element="R8" pad="1"/>
</signal>
<signal name="LED_CONTROL">
<contactref element="U$1" pad="3"/>
<contactref element="TFT" pad="8"/>
<contactref element="JP2" pad="3"/>
</signal>
<signal name="TX">
<contactref element="U$1" pad="1"/>
<contactref element="JP2" pad="1"/>
</signal>
<signal name="VIN">
<contactref element="R16" pad="1"/>
<contactref element="LDO" pad="5"/>
<contactref element="C7" pad="1"/>
<contactref element="U$1" pad="VIN"/>
<contactref element="R7" pad="2"/>
</signal>
</signals>
</board>
</drawing>
</eagle>
