<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE eagle SYSTEM "eagle.dtd">
<eagle version="6.5.0">
<drawing>
<board>
<plain>
<text>WeatherMote</text>
<text>Temp/Humid/Pressure
Moteino shield by A</text>
<text>Based on work by Felix
at LowPowerLab.com</text>
<wire x1="51.181" y1="1.905" x2="49.276" y2="0" width="0" layer="20" curve="-90"/>
<wire x1="49.276" y1="33.909" x2="51.181" y2="32.004" width="0" layer="20" curve="-90"/>
<wire x1="0.762" y1="0" x2="49.276" y2="0" width="0" layer="20"/>
<wire x1="49.276" y1="33.909" x2="0.7346375" y2="33.909" width="0" layer="20"/>
<wire x1="0.7346375" y1="33.909" x2="0.004290625" y2="33.178653125" width="0" layer="20" curve="90"/>
<wire x1="0.004290625" y1="33.178653125" x2="0" y2="0.762" width="0" layer="20"/>
<wire x1="0" y1="0.762" x2="0.762" y2="0" width="0" layer="20"/>
<wire x1="51.181" y1="32.004" x2="51.181" y2="1.905" width="0" layer="20"/>
<text>R3 CC-BY-SA 3.0</text>
<text>A2</text>
<text>1-Wire</text>
<text>A3</text>
<text>DHT</text>
<text>A4</text>
<text>A5</text>
<text>SDA</text>
<text>SCL</text>
<text>SCL</text>
<text>SDA</text>
<text>1-Wire</text>
<text>GND</text>
<text>3.3V</text>
<text>3.3V</text>
<text>GND</text>
<text>zZq</text>
<text>D4</text>
<text>3.3V</text>
<text>VIN</text>
<text>A6</text>
<wire x1="50.038" y1="21.717" x2="43.942" y2="21.717" width="0" layer="20"/>
<wire x1="43.942" y1="21.717" x2="43.942" y2="19.177" width="0" layer="20"/>
<wire x1="43.942" y1="19.177" x2="44.958" y2="19.177" width="0" layer="20"/>
<wire x1="44.958" y1="19.177" x2="44.958" y2="20.701" width="0" layer="20"/>
<wire x1="44.958" y1="20.701" x2="50.038" y2="20.701" width="0" layer="20"/>
<wire x1="50.038" y1="20.701" x2="50.038" y2="21.717" width="0" layer="20"/>
<wire x1="44.958" y1="13.081" x2="50.038" y2="13.081" width="0" layer="20"/>
<wire x1="50.038" y1="13.081" x2="50.038" y2="11.938" width="0" layer="20"/>
<wire x1="50.038" y1="11.938" x2="43.942" y2="11.938" width="0" layer="20"/>
<wire x1="43.942" y1="11.938" x2="43.942" y2="14.478" width="0" layer="20"/>
<wire x1="43.942" y1="14.478" x2="44.958" y2="14.478" width="0" layer="20"/>
<wire x1="44.958" y1="14.478" x2="44.958" y2="13.081" width="0" layer="20"/>
<text>CUT OUT</text>
<text>CUT OUT</text>
<text>R2</text>
</plain>
<libraries>
<library name="LowPowerLab">
<packages>
<package name="0603-RES">
</package>
<package name="AXIAL-1/4W">
</package>
</packages>
</library>
<library name="SparkFun-Connectors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find connectors and sockets- basically anything that can be plugged into or onto.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="1X13">
</package>
<package name="1X08">
</package>
<package name="1X02_2.54_SCREWTERM">
</package>
</packages>
</library>
<library name="SparkFun-Aesthetics">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find non-functional items- supply symbols, logos, notations, frame blocks, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="OSHW-LOGO-S">
</package>
<package name="CREATIVE_COMMONS">
</package>
</packages>
</library>
<library name="RHT03_DHT-22_AM2302">
<description>&lt;h1&gt;RHT03 / DHT-22 / AM2302 library&lt;/h1&gt;
&lt;p&gt;
Library with devices (schematic symbol and packages) for the RHT03 / DHT-22 / AM2302 digital relative humidity and tempearture sensor.&lt;br /&gt;
Warning: Package does not include tKeepout areas so that the part may optionally be placed on a riser with components underneath.  Please keep the package outline and bent-pin space in mind.
&lt;/p&gt;</description>
<packages>
<package name="RHT03_DHT-22/RA">
<description>&lt;h1&gt;RHT03 / DHT-22 - RIGHT ANGLE&lt;/h1&gt;
&lt;p&gt;
Right angle package for the RHT03 / DHT-22 relative humidity and temperature sensor.
&lt;/p&gt;</description>
</package>
</packages>
</library>
<library name="1wire">
<description>&lt;h1&gt;Dallas/Maxim 1-Wire/iButton devices&lt;/h1&gt;
&lt;p&gt;Onewire is a simple, low-cost bus system working with hundreds of devices on an up to 300m long one-wire (plus GND) bus system. It is relative slow (~16kBaud) but electrically undemanding, too. The onewire is hotplug-capable, if the host software supports it. The bus can be controlled by a single &amp;mu;C port pin or by special host adapter chips, which are available for RS232, Parallel, I&lt;sup&gt;2&lt;/sup&gt;C, and USB to onewire conversion. They are available as ready-to-run host adapter devices, too.&lt;/p&gt;
&lt;p&gt;The chips on the bus can be powered through the bus line, this is called "parasite power". All neccesary circuit and capacities for parasite power are on chip. Some chips need an additional power source to provide all features.&lt;/p&gt;
&lt;p&gt;iButton is an application for onewire devices, using special packaged onewire devices as keys or for data storage. All onewire chips have a unique serial number for technical reasons, and together with the hot-plug capability this makes them useable as unique keys. In addition, many onewire chips have additional memory (EPROM, EEPROM, RAM) on the chip, which can be used to store cryptographic keys. iButtons come in various packages which are protected against corrosive agents and weather influences.&lt;/p&gt;
&lt;p&gt;Get more info at &lt;tt&gt;http://www.maxim-ic.com/1-Wire.cfm&lt;/tt&gt;&lt;/p&gt;
&lt;p&gt;Linux driver at &lt;tt&gt;http://owfs.sf.net&lt;/tt&gt;&lt;/p&gt;
&lt;h3&gt;Copyright notice:&lt;/h3&gt;
&lt;p&gt;The devices in this library are copyrighted by various authors &amp;mdash; permission to use, distribute and modify this library is given to you at the terms of the LGPL. Copyright holders are&lt;/p&gt;
&lt;ul&gt;
&lt;li&gt;Jan Kandziora &amp;lt;jjj@gmx.de&amp;gt;&lt;/li&gt;
&lt;li&gt;Giovanni Varasano &amp;lt;giovanni.varasano@fastwebnet.it&amp;gt;&lt;/li&gt;
&lt;/ul&gt;
&lt;p&gt;The authorship for each device is given in the device notes.&lt;/p&gt;</description>
<packages>
<package name="TO92-">
<description>&lt;b&gt;TO-92&lt;/b&gt;</description>
</package>
</packages>
</library>
<library name="SparkFun-Sensors">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find sensors- accelerometers, gyros, compasses, magnetometers, light sensors, imagers, temp sensors, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="BMP180">
</package>
<package name="HTU21D">
<description>&lt;b&gt;Description:&lt;/b&gt; HTU21D is a very small, low cost, I2C digital humidity and temperature sensor.</description>
</package>
</packages>
</library>
<library name="SparkFun-Passives">
<description>&lt;h3&gt;SparkFun Electronics' preferred foot prints&lt;/h3&gt;
In this library you'll find resistors, capacitors, inductors, test points, jumper pads, etc.&lt;br&gt;&lt;br&gt;
We've spent an enormous amount of time creating and checking these footprints and parts, but it is the end user's responsibility to ensure correctness and suitablity for a given componet or application. If you enjoy using this library, please buy one of our products at www.sparkfun.com.
&lt;br&gt;&lt;br&gt;
&lt;b&gt;Licensing:&lt;/b&gt; CC v3.0 Share-Alike You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.</description>
<packages>
<package name="SJ_3_PASTE1&amp;2&amp;3">
</package>
<package name="EIA3216">
</package>
<package name="0603-CAP">
</package>
<package name="CAP-PTH-SMALL2">
</package>
<package name="SJ_3_PASTE1&amp;2">
</package>
</packages>
</library>
<library name="zZq">
<description>&lt;b&gt;zZq Library&lt;/b&gt;&lt;p&gt;

&lt;author&gt;Created by A&lt;/author&gt;</description>
<packages>
<package name="UMAX8">
<description>&lt;b&gt;micro MAX Package&lt;/b&gt;</description>
</package>
</packages>
</library>
<library name="transistor-small-signal">
<description>&lt;b&gt;Small Signal Transistors&lt;/b&gt;&lt;p&gt;
Packages from :&lt;br&gt;
www.infineon.com; &lt;br&gt;
www.semiconductors.com;&lt;br&gt;
www.irf.com&lt;p&gt;
&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
<packages>
<package name="SOT23">
<description>&lt;b&gt;SOT-23&lt;/b&gt;</description>
</package>
</packages>
</library>
</libraries>
<attributes>
</attributes>
<variantdefs>
</variantdefs>
<elements>
<element name="JP1" library="SparkFun-Connectors" package="1X13" value="M13"/>
<element name="JP2" library="SparkFun-Connectors" package="1X13" value="M13"/>
<element name="JP3" library="SparkFun-Connectors" package="1X08" value="">
<attribute name="VALUE"/>
</element>
<element name="R2" library="LowPowerLab" package="0603-RES" value="10k">
<attribute name="VALUE"/>
</element>
<element name="R4" library="LowPowerLab" package="AXIAL-1/4W" value="10K"/>
<element name="U$1" library="SparkFun-Aesthetics" package="OSHW-LOGO-S" value=""/>
<element name="U$2" library="SparkFun-Aesthetics" package="OSHW-LOGO-S" value=""/>
<element name="R1" library="LowPowerLab" package="0603-RES" value="4.7k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R3" library="LowPowerLab" package="AXIAL-1/4W" value="4.7k"/>
<element name="U1" library="RHT03_DHT-22_AM2302" package="RHT03_DHT-22/RA" value="DHT22">
<attribute name="PROD_ID" value="SEN-10167"/>
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="U5" library="1wire" package="TO92-" value="DS18B20">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="U2" library="SparkFun-Sensors" package="BMP180" value="BMP180">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="SJ1" library="SparkFun-Passives" package="SJ_3_PASTE1&amp;2&amp;3" value="I2C Pullup">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R5" library="LowPowerLab" package="0603-RES" value="4.7k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R6" library="LowPowerLab" package="AXIAL-1/4W" value="4.7k"/>
<element name="R7" library="LowPowerLab" package="0603-RES" value="4.7k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R8" library="LowPowerLab" package="AXIAL-1/4W" value="4.7k"/>
<element name="C3" library="SparkFun-Passives" package="EIA3216" value="10uf">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C2" library="SparkFun-Passives" package="0603-CAP" value="0.1uf">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C1" library="SparkFun-Passives" package="0603-CAP" value="0.1uf">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R9" library="LowPowerLab" package="0603-RES" value="1M">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R10" library="LowPowerLab" package="AXIAL-1/4W" value="1M"/>
<element name="R11" library="LowPowerLab" package="0603-RES" value="470k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R12" library="LowPowerLab" package="AXIAL-1/4W" value="470k"/>
<element name="C5" library="SparkFun-Passives" package="CAP-PTH-SMALL2" value="0.1uf"/>
<element name="C4" library="SparkFun-Passives" package="0603-CAP" value="0.1uf">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="U3" library="zZq" package="UMAX8" value="MAX31826">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="U4" library="SparkFun-Sensors" package="HTU21D" value="Si7021">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C6" library="SparkFun-Passives" package="0603-CAP" value="0.1uf">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="JP4" library="SparkFun-Connectors" package="1X02_2.54_SCREWTERM" value="M022.54MM_SCREWTERM"/>
<element name="FRAME1" library="SparkFun-Aesthetics" package="CREATIVE_COMMONS" value="FRAME-LETTER"/>
<element name="SJ2" library="SparkFun-Passives" package="SJ_3_PASTE1&amp;2" value="Regulator Bypass">
<attribute name="NAME"/>
<attribute name="VALUE"/>
<attribute name="VALUE"/>
</element>
<element name="Q1" library="transistor-small-signal" package="SOT23" value="BSS84">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="C7" library="SparkFun-Passives" package="0603-CAP" value="0.1uf">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R13" library="LowPowerLab" package="0603-RES" value="4.7k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R14" library="LowPowerLab" package="0603-RES" value="10k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
<element name="R15" library="LowPowerLab" package="0603-RES" value="10k">
<attribute name="NAME"/>
<attribute name="VALUE"/>
</element>
</elements>
<signals>
<signal name="GND">
<contactref element="JP1" pad="1"/>
<contactref element="U1" pad="GND"/>
<contactref element="U5" pad="1"/>
<contactref element="U5" pad="1"/>
<contactref element="U2" pad="7"/>
<contactref element="U2" pad="7"/>
<contactref element="C3" pad="C"/>
<contactref element="C1" pad="2"/>
<contactref element="C2" pad="2"/>
<contactref element="JP3" pad="1"/>
<contactref element="JP3" pad="5"/>
<contactref element="C5" pad="2"/>
<contactref element="C4" pad="2"/>
<contactref element="R12" pad="P$1"/>
<contactref element="R11" pad="1"/>
<contactref element="U3" pad="4"/>
<contactref element="U3" pad="4"/>
<contactref element="U3" pad="8"/>
<contactref element="U3" pad="7"/>
<contactref element="U3" pad="6"/>
<contactref element="U3" pad="5"/>
<contactref element="U4" pad="GND"/>
<contactref element="C6" pad="2"/>
<contactref element="JP4" pad="P1"/>
<contactref element="R13" pad="2"/>
<contactref element="U4" pad="7"/>
</signal>
<signal name="+3V3">
<contactref element="JP1" pad="3"/>
<contactref element="U1" pad="VDD"/>
<contactref element="U5" pad="3"/>
<contactref element="SJ1" pad="2"/>
<contactref element="C3" pad="A"/>
<contactref element="U2" pad="2"/>
<contactref element="C1" pad="1"/>
<contactref element="C2" pad="1"/>
<contactref element="U2" pad="3"/>
<contactref element="R2" pad="1"/>
<contactref element="R4" pad="P$1"/>
<contactref element="R1" pad="1"/>
<contactref element="R3" pad="P$1"/>
<contactref element="JP3" pad="8"/>
<contactref element="JP3" pad="3"/>
<contactref element="U3" pad="1"/>
<contactref element="C6" pad="1"/>
<contactref element="U4" pad="VDD"/>
<contactref element="SJ2" pad="3"/>
</signal>
<signal name="DHT22_DATA">
<contactref element="U1" pad="DATA"/>
<contactref element="R4" pad="P$2"/>
<contactref element="R2" pad="2"/>
<contactref element="JP1" pad="10"/>
</signal>
<signal name="1W">
<contactref element="U5" pad="2"/>
<contactref element="R3" pad="P$2"/>
<contactref element="R1" pad="2"/>
<contactref element="JP1" pad="11"/>
<contactref element="JP3" pad="2"/>
<contactref element="U3" pad="2"/>
</signal>
<signal name="SDA">
<contactref element="JP1" pad="9"/>
<contactref element="R5" pad="2"/>
<contactref element="R6" pad="P$2"/>
<contactref element="U2" pad="6"/>
<contactref element="JP3" pad="6"/>
<contactref element="U4" pad="DATA"/>
</signal>
<signal name="SCL">
<contactref element="JP1" pad="8"/>
<contactref element="R7" pad="2"/>
<contactref element="R8" pad="P$2"/>
<contactref element="U2" pad="5"/>
<contactref element="JP3" pad="7"/>
<contactref element="U4" pad="SCK"/>
</signal>
<signal name="SDA'">
<contactref element="R5" pad="1"/>
<contactref element="R6" pad="P$1"/>
<contactref element="SJ1" pad="3"/>
</signal>
<signal name="SCL'">
<contactref element="R7" pad="1"/>
<contactref element="R8" pad="P$1"/>
<contactref element="SJ1" pad="1"/>
</signal>
<signal name="A6">
<contactref element="JP1" pad="7"/>
<contactref element="R10" pad="P$2"/>
<contactref element="R9" pad="2"/>
<contactref element="C5" pad="1"/>
<contactref element="C4" pad="1"/>
<contactref element="R12" pad="P$2"/>
<contactref element="R11" pad="2"/>
<contactref element="R15" pad="1"/>
<contactref element="R13" pad="1"/>
</signal>
<signal name="VIN">
<contactref element="JP1" pad="2"/>
<contactref element="R10" pad="P$1"/>
<contactref element="R9" pad="1"/>
<contactref element="SJ2" pad="1"/>
<contactref element="Q1" pad="2"/>
<contactref element="R14" pad="2"/>
</signal>
<signal name="N$2">
</signal>
<signal name="N$3">
<contactref element="JP4" pad="P2"/>
<contactref element="SJ2" pad="2"/>
</signal>
<signal name="D4">
<contactref element="JP2" pad="10"/>
<contactref element="C7" pad="1"/>
</signal>
<signal name="N$4">
<contactref element="C7" pad="2"/>
<contactref element="Q1" pad="1"/>
<contactref element="R14" pad="1"/>
</signal>
<signal name="N$5">
<contactref element="Q1" pad="3"/>
<contactref element="R15" pad="2"/>
</signal>
</signals>
</board>
</drawing>
</eagle>
