Design Rule Verification Report

Date:		4/18/2025
Time:		12:28:19 AM
Elapsed Time:		00:00:00
Filename:		C:\Users\Public\Documents\Altium\P24398_Humidity_Sensor\P24398_Humidity_Sensor.PcbDoc

Summary

Warnings	Count
Total	0

Rule Violations	Count
Clearance Constraint (Gap=0.127mm) (All),(All)	0
Clearance Constraint (Gap=0.254mm) (InPolygon),(All)	0
Short-Circuit Constraint (Allowed=No) (All),(All)	0
Un-Routed Net Constraint ( (All) )	0
Modified Polygon (Allow modified: No), (Allow shelved: No)	0
Width Constraint (Min=0.152mm) (Max=10.16mm) (Preferred=0.203mm) (All)	0
Width Constraint (Min=0.508mm) (Max=1.016mm) (Preferred=0.762mm) (InNetClass('Power'))	0
Width Constraint (Min=0.254mm) (Max=0.762mm) (Preferred=0.508mm) (InNet('GND'))	0
Width Constraint (Min=0.254mm) (Max=0.762mm) (Preferred=0.508mm) (InNetClass('3V3'))	0
Routing Topology Rule(Topology=Shortest) (All)	0
Power Plane Connect Rule(Relief Connect )(Expansion=0.102mm) (Conductor Width=0.152mm) (Air Gap=0.152mm) (Entries=4) (All)	0
Minimum Annular Ring (Minimum=0.102mm) (All)	0
Hole Size Constraint (Min=0.254mm) (Max=6.731mm) (All)	0
Hole To Hole Clearance (Gap=0.254mm) (All),(All)	0
Minimum Solder Mask Sliver (Gap=0mm) (All),(All)	0
Silk To Solder Mask (Clearance=0.127mm) (IsPad),(All)	0
Silk to Silk (Clearance=0mm) (All),(All)	0
Net Antennae (Tolerance=0mm) (All)	0
Board Clearance Constraint (Gap=0mm) (All)	0
Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)	0
Total	0

Waived Violations	Count
Board Clearance Constraint (Gap=0mm) (All)	3
Total	3

Board Clearance Constraint (Gap=0mm) (All)
Board Outline Clearance(Outline Edge): (Collision < 0.381mm) Between Board Edge And Track (50.626mm,14.136mm)(51.946mm,14.136mm) on Top Overlay Waived by Andrew Wolters at 4/8/2025 9:39:10 AM USB Connector Meant to hang off of PCB.
Board Outline Clearance(Outline Edge): (Collision < 0.381mm) Between Board Edge And Track (50.626mm,22.186mm)(51.946mm,22.186mm) on Top Overlay Waived by Andrew Wolters at 4/8/2025 9:39:10 AM USB Connector Meant to hang off of PCB.
Board Outline Clearance(Outline Edge): (Collision < 0.381mm) Between Board Edge And Track (51.946mm,14.136mm)(51.946mm,22.186mm) on Top Overlay Waived by Andrew Wolters at 4/8/2025 9:39:10 AM USB Connector Meant to hang off of PCB.